Expert Answers about A-Frame Trailer Coupler

• A-Frame Trailer Coupler w/ Round Jack Hole That is Made in the USA
• This A-Frame Trailer Coupler w/ Round Jack Hole # CA-5280-RB is manufactured in China. We do have similar options like the Buyers Products A-Frame Trailer Coupler w Jack Hole # 3370091595 and Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole # 12660-97SP that are both made in the USA if that is what you are looking for.
  view full answer...


• Where is the etrailer Coupler Item # CA-5196-B Made?
• The Sleeve-Lock A-Frame Trailer Coupler - Flip Latch - Black - 2" Ball - 7,000 lbs item # CA-5196-B is made by Pacific Boat Trailers out of Chino, California with parts coming from China. If you are looking for an American made A-frame Trailer Coupler I recommend the Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2" Ball - Bolt On - 10K Item # DM14793-81. This has the same dimensions but a slightly higher capacity and is made in the USA.
  view full answer...


• What is the Metal Thickness of etrailer CA-5100-Z Weld-On 2-Inch A-Frame Trailer Coupler
• The etrailer brand # CA-5100-Z is manufactured in China. It's constructed of 1/8 inch thick stamped zinc plated steel, which works out to be 11 gauge. For a US made 2 inch weld-on A-Frame coupler of the same thickness, I'd recommend the Dutton-Lainson # DL14008 which is constructed of 11 gauge stamped steel that features tough enamel finish. The coupler has a 5000 lb capacity, like the # CA-5100-Z coupler you'd looked at.
  view full answer...


• Is Bulldog Heavy-Duty Cast Head Coupler Made of Cast Iron?
• The Bulldog Heavy-Duty Cast Head Coupler # BD44150WH301 is actually made out of cast steel. It also has a zinc finish in order to protect it from corrosion. This coupler has an A-frame design and mounts to a 50-degree trailer tongue. I've added a link to a video review of this product for you to take a look at.
  view full answer...


• Where is the Titan Weld-On Trailer Coupler # T1755000 made
• I spoke with my contact at Titan and the Weld-on coupler # T1755000 is made in the U.S.A., formed in Wisconsin and assembled in Iowa.
  view full answer...


• Is the Dutton-Lainson Coupler Made in the USA
• Yes, the Dutton-Lainson Coupler # DL23870 is made in the USA. This is a 1-7/8" coupler that fits trailer frames that are 2" wide. It has a capacity of 2,000 lbs and tongue weight of 200 lbs. I have attached a video review of the coupler for your reference.
  view full answer...


• Will the Convert-A-Ball Gooseneck Coupler Adapter # CAB-C5G Handle Long Trips
• You should have no problem using the Convert-A-Ball Gooseneck Coupler Adapter, # CAB-C5G, on a 1,200 mile trip as long as the gross weight of your trailer remains under 20,000 lbs and the pin weight is under 4,000 lbs. We had one customer comment that he has been using his adapter for over 20,000 miles and it is still working great. The only note I would add to this adapter is that there will be a noticeable difference in the ride quality if you are used to towing with a fifth wheel hitch....
  view full answer...


• Where Do I Look If I Can't Find the VIN on a 1997 Doo Little 20 Foot Trailer?
• Usually brand name trailer manufacturers will indicate the unique vehicle identification number (VIN) on the same plaque that carries their brand name, model number information and the trailer specifications. If you cannot find the VIN on the trailer tongue you can check for plaques on other parts of the trailer. It may even be stamped into the frame. Perhaps you can find some helping hands to assist you in moving the trailer around to check its underside (especially near the axle and...
  view full answer...


• USA Made A-Frame 2,000 Lbs Top Wind Trailer Jack
• I reached out to my contact at Future 2 Solutions and he advised me that the Ultimate Trail A-Frame Jack # 322-RDJ-2K is made overseas. If you are looking for a USA made A-frame trailer jack, the Dutton Lainson jacks are all made in the USA. The A-Frame Trailer Topwind Jack # DL22781 has a 2,000lb weight rating and no drop leg like the # 322-RDJ-2K you inquired about.
  view full answer...


• Where is MaxxTow A-Frame Trailer Tongue Toolbox Made
• We do have A-frame trailer tongue toolboxes that are made in the USA, though the MaxxTow MaxxHaul Trailer Tongue Toolbox is made in China. Like you mentioned, the RC Manufacturing toolboxes are made in the USA and are a very high quality toolbox. It has a locking handle to protect your tools, a weatherproof seal to keep them dry, and a gas strut that keeps the lid open while you find what you need so you don't have to hold it up. These A-frame toolboxes are available in black or silver...
  view full answer...


• Where is Aluminum A-Frame Trailer Tongue Toolbox # 350975 Made
• I spoke with my contact at RC Manufacturing and she confirmed that the Aluminum A-Frame Trailer Tongue Toolbox part # 350975 is proudly made in Elkhart, IN USA.
  view full answer...


• VIN Location On 2000 Haulin Trailer
• Vin numbers are usually located on the trailer tongue near the coupler. It is normally an alpha numeric number with 17 digits and can technically be anywhere on the trailer, so you will need to examine the entire frame closely. The VIN is usually stamped into a plate that is attached to the trailer but is could be stamped in the trailer frame somewhere. If you cannot find the VIN, your State Highway Patrol is usually the call to get an appointment for them to assign a VIN for you....
  view full answer...


• Is the Aluminum A-Frame Trailer Tongue Toolbox 350970 Waterproof
• Aluminum A-Frame Trailer Tongue Toolbox Item # 350970 is weather resistant but not waterproof. For something to be considered waterproof it has to be able to be submerged under water for a certain period of time and not let water in. None of the toolboxes are waterproof but as far as keeping out rain they can do that just fine.
  view full answer...


• A-Frame Mounted Tongue Jack With 5,000LB Capacity That is Made In The USA
• The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option # TV94FR is made in China. If you are looking for a manual jack with 5,000lb rated capacity that is made in the USA we have the A-Frame Trailer Jack by Dutton-Lainson # DL22772. This jack also has a black powder coat finish.
  view full answer...


• What is the Country of Origin for the Stromberg Carlson Electric A-Frame Trailer Jack # JET-5000
• Stromberg Carlson has headquarters in Michigan, but the Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black Item # JET-5000, is manufactured in China. This bolt-on electric jack offers a 5000-lb lift capacity and carries a 2-Year Warranty. This jack has great customer reviews.
  view full answer...


• 2,000 Pound A-frame Trailer Jack thats Made in the USA
• Curt trailer jacks like part # C28200 are all made in China. A lot of trailer jacks are but we do have the Dutton-Lainson which has similar specs to the Curt and is made in the USA if that's what you're looking for. Look at part # DL22781. It has the same 2,000 pound capacity with 14 inches of travel and fits the standard A-frame bolt pattern just like the Curt.
  view full answer...


• Is Tinned Wiring Used In Trailer Wiring Kits
• The trailer wiring we offer like part # A40W5B, is designed to be used as a 5-wire harness, and works well with a trailer that has a surge coupler. The wires used in this harness are 16 gauge except the blue brake wire which is 18 gauge, and designed to be able to safely handle the current from a 12 volt system. The wires in this harness are not tinned. From my research I found that tinned wire is normally used in industrial wiring and used when the operating temperature of the wire is...
  view full answer...


• Trailer Jacks Manufactured in the USA
• There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options: Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. # DL22800 Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. # DL22560 A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 Pull...
  view full answer...


• What Grade Stainless Steel are C.E. Smith U-Bolts CE15503A?
• The Stainless Steel CE Smith U-Bolts you mentioned, part # CE15503A are made from high quality 304 stainless steel to prevent corrosion. They are designed for mounting accessories and brackets to trailer frames.
  view full answer...


• Are There Any American Made Trailer Tongue Jacks Available?
• We do indeed carry American made jacks. You will want to check out the Dutton-Lainson line. All of their jacks are made here except the Model 7201 # DL22320 and Model 3400 # DL22300. With that said, if you are specifically looking for an A-Frame jack, you will want to check out the Dutton-Lainson A-Frame Trailer Jack - Topwind - 5,000 lbs. # DL22772. This will have 14" of lift , but does not include a foot plate. If you prefer a foot plate, you will want the # DL22542, but if you wanted...
  view full answer...